ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ
MP 1 submersible pump: With LDPE tube 60 m
Power input: 1.3kW
Voltage: 3 x 220 V 400 Hz
Maximum current: 5.5 A
Motor protection: Built-in thermal switch
Water temperature: 0 °C to +35 °C
Discharge port: Rp 3/4
Continuous operation: 500 hours
Package size: 120 x 80 x 100 cm | 47.2 x 31.4 x 39.3 inch
Applications
Anaerobe sampling
Purging and sampling of monitoring wells
Maximum lift of 90 metres of water
Description
The MP 1 / Redi-Flo2 submersible pump is specially designed for purging and sampling of monitoring wells. Originally designed by Grundfos, Royal Eijkelkamp is now exclusive manufacturer of this unique groundwater pump. It’s the only pump in the world which can lift water up to 90 m above water level within a well with a diameter as small as 50 mm (2 inch)! This pump can be delivered with a re-usable PTFE tube, a low-cost LDPE tube, or no tube. The high capacity of this pump allows for quick purging of the measuring point. By setting a low pumping capacity the same pump can be used for sampling. The pump housing is completely made of stainless steel, which helps prevent contamination of the sample. The pump motor is controlled by an adjustable frequency converter. Thanks to the variable setting of the frequency, the capacity of the pump can be adjusted from 0 to 2m3 /hour. This results in a steady flow of anaerobe water.Every measurement point must be purged before samples can be taken. The large capacity of the MP 1 pump ensures that the measuring point is quickly purged. By setting it at a lower pumping capacity, the MP 1 can also be used for sampling.Built-in safeguards protect the MP 1 and the converter against overload. The actual frequency can be read from a display.
Available variants
12.27.SF PTFE tube, 30 metres
12.27.SG PTFE tube, 60 metres
12.27.SH PTFE tube, 90 metres
12.27.SL LDPE tube, 30 metres
12.27.SM LDPE tube, 60 metres
12.27.SN LDPE tube, 90 metres
No tube
Set contents
The set is delivered fully assembled and contains:
Submersible pump MP 1
Cooling jacket
Frequency converter
Tube option of choice
Cables
Hose reel cart
Service kit
Manual
Brochure
