Accuracy: ± 1 %
Baud Rate: 9600 to 115200
Materials: Aluminum
Compliance: BTL, CE
Device Load: 1/8 Unit
Conductivity: > 20 µS/cm
Display Type: N/A
Accuracy Note: High accuracy 8˝ (200 mm) pipe; 1% of reading, High accuracy units: ± 0.5% of reading at calibrated velocity; ± 1% of reading from 2 to 20 ft/s (0.6 to 6 m/s); ± 0.02 ft/s (± 0.006 m/s) at < 2 ft/s (0.6 m/s); Standard accuracy units: ± 1% FS
Display Range: 0 to 100% Glycol Display Selectable
Output Detail: (1) Analog: 4-20 mA, 0-5 V, 0-10 V or 2-10 V (display selectable); (1) Pulse/Frequency: 0-15 V peak pulse, 0 to 500 Hz or scalable pulse output (display selectable); (2) Alarm: (1) Empty pipe detection or minimum/maximum velocity, (display selectable); (1) Reverse flow output indication
Output Signal: Current, Voltage, DC Pulse
Control Output: Alarm
Data Interface: BACnet, Modbus
Pipe Size, Max: 8 in
Pipe Size, Min: 0 in
Supply Voltage: 12 to 42.4 Vdc, 0.25 A @ 24 Vdc; 12 to 36 Vac
Pressure Limits: Up to 400 psi
Enclosure Ratings: IP68, NEMA Type 6P
Materials, Wetted: Polymer, Silicon, Stainless Steel
Supply Power Type: AC/DC
Pressure Drop Note: < 0.1 psi at 12 ft/s in 4" (101.6 mm) and Larger Pipe
Pressure Drop, Max: 0.1 psi
Media Compatibility: Acid Solutions, Conductive Liquids, Saltwater
Electrical Connection: Cable Gland with Screw Terminal block
Linear Flow Rate, Max: 20 ft/s
Linear Flow Rate, Min: 0 ft/s
Process Connection Size: 1 in
Process Connection Type: BSPT Male
Process Temperature, Max: 250 °F
Process Temperature, Min: 15 °F
Storage Temperature, Max: 185 °F
Storage Temperature, Min: -40 °F
Straight Run Requirements: >10 Diameter Upstream, >5 Diameter Downstream
Operating Temperature, Max: 160 °F
Operating Temperature, Min: -20 °F
