Cosmopia EC-155MHP ຫ້ອງອຸນຫະພູມ ແລະ ຄວາມຊື້ນ (-40 ~ 100 ℃; 20 ~ 98 %RH; 1500L; 70 A)

Temperature range: -40 to 100 ℃

Humidity range: 20 to 98 %RH

JTM K09

Temperature / humidity fluctuation (100.0℃ or lower): ±0.3 ℃ / ±3.0 %RH

Temperature / humidity fluctuation (100.1℃ or higher): -

Temperature / humidity gradient (100.0℃ or lower): 4.0 ℃ / 10.0 %RH

Temperature / humidity gradient (100.1℃ or higher): -

Spatial temperature / humidity deviation (100.0℃ or lower): 3.0 ℃ / 8.0 %RH

Spatial temperature / humidity deviation (100.1℃ or higher): -

For JTM K09 K07

Temperature change rate (Drop): 1.0℃/min. (86 to -26℃)

Temperature change rate (Rise): 2.0℃/min. (-26 to 86℃)

Time to reach temperature extreme (Drop): Within 70 min. (20 to -40℃)

Time to reach temperature extreme (Rise): Within 40 min. (20 to 100℃)

Testing chamber volume: 1,500 L (Width 1,000 x Depth 1,500 x Height 1,000 mm)

Product dimensions: Width 1,470 × Depth 2,070 × Height 2,000 mm

Exterior coating color: Natural gray (Munsell code: 1.0Y8.5/0.5)

Cooling method: Water-cooling, single-stage compression refrigeration x 2; Refrigerant: R404A

Controller: Operation modes: Set-point or program operation (Steps: 20 per pattern, Repetitions: Max. 98 and infinite)

Safeguards: Earth leakage circuit breaker, operation circuit fuse, electric motor overload safeguard, high-voltage shutdown system, excess temperature increase prevention system, empty heating prevention system, heater overcurrent safeguard, etc.

Equipment: Observation window, chamber light, cable hole, casters, level adjusters, and auto water supply connection port

Accessories: Shelf support, shelf, fuse, Y strainer, rubber plug, and instruction manual

Coolant: 2,400 L/h (coolant inlet temperature 32°C), Pressure: 0.1 to 0.5 MPa, Piping diameter: Rc1

Power supply: Three-phase 200V 50/60Hz, Three-phase 220V 60Hz, Three-phase 380V 50Hz

Maximum load current: 70 A

Product weight: 850 kg

Datasheet