Ceyear 1435C ເຄື່ອງກໍາເນີດສັນຍານ (9 kHz ~12 GHz)

Frequency Range: 9 kHz to 12 GHz,

Frequency Resolution: 0.001 Hz

Frequency Switching Time: ≤ 1ms (typical)

Time Base Aging Rate (typ.)

Standard: ±5×10^-7/year (after continuous switch-on for 30 days)

High stability time base option H10:

•  ±5×10^-8/year (after continuous switch-on for 30 days),

•  ±5×10^-10/day(after continuous switch-on for 30 days)

Reference Output

•  Frequency: 10MHz

•  Power: >+4dBm, to 50Ω load

Reference Input

•  Frequency: 1MHz – 50MHz, step 1Hz

•  Power: 0dBm to +7dBm, impedance 50Ω

Scanning Mode: Step scan, List scan

Scan Dwell Time: 100μs – 100s

Minimum Output Power

•  Standard: -15dBm (can be set -20dBm)

•  Option H01: -110dBm (can be set -135dBm)

Maximum Output Power (Standard)

•  9kHz ≤ f ≤ 3GHz: 16dBm

•  3GHz < f≤ 20GHz: 15dBm

Maximum Output Power (Option H08)

•  9kHz ≤ f ≤ 3GHz: 21dBm

•  3GHz < f≤ 20GHz: 20dBm

Power Resolution: 0.01 dB

VSWR (typ.)

•  9kHz ≤ f ≤ 3GHz: <1.7

•  3GHz < f ≤ 13GHz: <1.6

•  13GHz < f ≤ 20GHz: <1.8

•  20GHz < f ≤ 40GHz: <1.6

Maximum Rerverse Power: 0.5W (0V DC) (rated value)

Haimonic Wave (at +10dBm)

•  9kHz ≤ f ≤ 10MHz: < -23dBc

•  10MHz < f ≤ 2GHz: < -30dBc

•  2GHz < f ≤ 6GHz: < -30dBc  (S1435B)

•  2GHz < f ≤ 20GHz: < -55dBc

•  20GHz < f ≤ 40GHz: < -50dBc (typ.)

Sub-harmonic Wave (at +10dBm)

•  9kHz ≤ f ≤ 6GHz: None

•  6GHz < f ≤ 12GHz: < -60dBc

•  12GHz < f ≤ 24GHz: < -55dBc

•  24GHz < f ≤ 40GHz: < -50dBc

Non-Harmonic Wave (Standard)

•  9kHz ≤ f ≤ 250MHz: < -54dBc

•  250MHz < f ≤ 3GHz: < -62dBc

•  3GHz < f ≤ 6GHz: < -56dBc

•  6GHz < f ≤ 12GHz: < -50dBc

•  12GHz < f ≤ 24GHz: < -44dBc

•  24GHz < f ≤ 40GHz: < -38dBc

(at 0dBm, 10kHz Frequency Offset)

Non-Harmonic Wave (Low Phase Noise Option H06)

•  9kHz ≤ f ≤ 250MHz: < -60dBc

•  250MHz < f ≤ 3GHz: < -77dBc

•  3GHz < f ≤ 6GHz: < -71dBc

•  6GHz < f ≤ 12GHz: < -65dBc

•  12GHz < f ≤ 24GHz: < -59dBc

•  24GHz < f ≤ 40GHz: < -53dBc

(at 0dBm, 10kHz Frequency Offset)

SSB Phase Noise (Carrier 1GHz, at +10dBm)

Standard:

•  ≤-83 dBc/Hz @ 100Hz offset

•  ≤-115 dBc/Hz @ 10kHz offset

Low Phase Noise Option H06:

•  ≤-83 dBc/Hz @ 100Hz offset

•  ≤-113 dBc/Hz @ 1kHz offset

•  ≤-132 dBc/Hz @ 10kHz offset

•  ≤-132 dBc / Hz @ 100kHz offset

Frequency Modulation (Option H02)

•  Maximum frequency offset: N × 16MHz (N is the number of fundamental harmonic wave)

•  Accuracy (1kHz modulation rate, frequency offset: N × 500kHz): ± (2% × set frequency offset + 20Hz)

•  Modulation rate (3dB bandwidth, frequency offset: N × 500kHz): DC – 7MHz

•  Distortion (1kHz rate, frequency offset: N × 500kHz): <0.4%

Phase Modulation (Option H02)

•  Maximum phase offset: N × 16rad (N is the number of fundamental harmonic wave)

•  Accuracy (1kHz modulation rate, frequency offset: N × 500kHz): ± (2% × set phase offset + 0.01rad)

•  Modulation rate (3dB bandwidth, phase offset: N × 8rad): DC – 1MHz

•  Distortion (1kHz modulation rate, phase offset: N × 8rad): <0.4%

Amplitude Modulation (Option H02)

•  Maximum depth: >90%

•  Modulation rate: (1kHz modulation rate, 30% modulation depth): ± (4% × set depth +1%)

•  Modulation rate (bandwidth: 3dB; modulation depth: 30%; frequency test points: 1GHz, 5GHz, 20GHz, 40GHz): DC – 100kHz

•  Distortion: (1kHz modulation rate, linear mode, total harmonic distortion, 30% modulation depth): <2%

Pulse Modulation (Option H03)

•  Switching ratio: >80dB

•  Rise and fall time: <10ns

•  Minimum pulse of internal fixed amplitude: 1μs

•  Minimum pulse of non-fixed amplitude: 100ns

Narrow Pulse Modulation (Option H04)

•  Switching ratio: >80dB

•  Rise and fall time: <10ns

•  Minimum pulse of internal fixed amplitude: 1μs

•  Minimum pulse of non-fixed amplitude: 20ns

Internal Analog Modulation Signal Generator (Option H02)

Providing three independent signals for frequency/phase modulation, amplitude modulation and low frequency output signals.

•  Waveform:   sine wave, square wave, triangle wave, sawtooth wave

•  Frequency range: sine wave 0.1Hz – 10MHz, square   wave, triangle wave, sawtooth wave 0.1Hz – 1MHz

•  Frequency resolution: 0.1Hz

•  Low  frequency output: amplitude 0-5V peak (rated value), to 50Ω load

Internal Pulse Generator (Option H03)

•  Pulse width: 20ns – (42s-10ns) (rated value)

•  Pulse period: 40ns – 42s (rated value)

•  Resolution: 10ns

Multi-Function Function Generator (Option H05)

RF Output Port: N type (female), impedance 50Ω

Power Consumption: < 300W

Dimension (max.)

•  330 (W) × 147 (H) × 397 (D) mm (excluding the handle)

•  420 (W) × 147 (H) × 445 (D) mm (including the handle)

Weight: < 12kg (the weight varies with the model and option configuration)

Power Supply: 100 – 120VAC, 50 – 60Hz; or 200 – 240VAC, 50 – 60Hz (self-adaptive)

See more detail information in the Datasheet

Datasheet

Manual