Bevs BEVS 1828 Automatic Panel Sprayer (150-250 mm, 0.3-0.7 Mpa)

Spray Parameters:

Panel moving speed:  X-axis 50-300 mm/s; Y-axis 1-30 mm/s; Z-axis 50-300 mm/s

Gun distance: 150-250 mm

Atomization pressure: 0.3-0.7 Mpa

Spray width (manual adjustment)

Sample flow volume (manual adjustment)

Spray gun nozzle diameter (optional according to actual conditions)

System Parameters:

Applicable paint type: water-based or solvent-based

Applicable paint viscosity range: 1-20000cps

Moving speed: X-axis 50-300 mm/s; Y-axis 1-30 mm/s; Z-axis 50-300 mm/s

Stroke length: 500 x 150 x 350 mm (X x Y x Z axis)

Gun distance: 150-250 mm

Atomization air pressure: 0-0.7 Mpa

System pressure: 0-0.7 Mpa

Panel lift height: 350 mm

Spraying area: max 300 × 450 mm; or 9 pcs of 100 × 150 mm standard panels

Spray gun type: gravity automatic spray gun

Dimension (Lx W x H): 955 x 550 x 1200 mm (1700 mm extension rod)

Introduction:

The BEVS 1828 Automatic Panel Sprayer is a fast, intelligent and automatic device for spraying panel, with advantage of reliable uniform coating for testing and evaluation. It is equipped with a 10-inch high-definition touch screen display for easy operation and has features like a one-button start, fully automatic spray, automatic cleaning spray gun, quick change of paint and spray gun. It is an advanced spraying equipment with intelligent programming spraying process, a good choice for spraying test panel in laboratory.

Features:

With 10-inch high-definition touch screen

Intelligent programming spray process

Three-axis automatic spraying

Optional single or dual spray gun

Automatic control of spray pressure

Quick replacement of the spray gun

Functions:

-Three-axis (X, Y, Z,) automatic control; X and Z axes are linked according to the setting program, and the Y-axis is automatically adjusted according to the distance parameter manually input or the preset in the mode (only for standard equipped spray gun)

-With cross wet spray process

-Multi-viscosity mode preset, input the required film thickness value and spray area, the system automatically calculates the spray cycles, the path and the start/end of the spray position, and spray the required thickness

-Custom spray mode: input parameters such as spray movement speed, gun distance, atomization pressure, spray cycles, start and end spray position, etc. It automatically sprays according to the set parameters. The custom mode parameters can be saved and applied next time

-The interface displays the current parameters in real time, such as the current coating thickness, the run spray cycles, remaining spray cycles, the estimated final film thickness, and the estimated remaining time

-Real-time monitor the environment, automatically power off to prevent explosion when reaching the set VOC (Optional function)

Standard: 

ASTM D823/A

Order Information: 

BEVS 1828 Automatic Panel Sprayer (Including one automatic spray gun)