Beich CH2711 Power Supply Comprehensive Tester (150V; 0.1W-12kW; Integrate DC electronic load)
Rated value
- Input voltage in electronic load: 0~150V
- Input current in electronic load: 0.1mA~30A
- Input power in electronic load: 150W
- Input voltage in power meter: 5-600V AC (Range auto switch), peak voltage:700V AC, Min. test voltage 5V AC, resolution 0.1V
- Input current in power meter: 10mA-20A AC( Range auto switch), peak current: 26A AC, Min. test current 10mA AC
- Input power in power meter: 0.1W-12kW
Specification in electronic load: Range/ Accuracy/ Resolution
- Load accuracy: 0-9.9999V/ ±(0.05%+0.03%FS)/ 0.1mV
10V-99.999V/ ±(0.05%+0.03%FS)/ 1mV
100V-150V/500V/ ±(0.05%+0.03%FS)/ 10mV
0-9.9999A/ ±(0.05%+0.05%FS)/ 0.1mA
10-15A/30A/ ±(0.05%+0.05%FS)/ 1mA
- CV mode: 1.5V-18V/ ±(0.05%+0.03%FS)/ 0.1mV/ 1mV
1.5V-150V/500V/ ±(0.05%+0.03%FS)/ 10mV
- CC mode: 0-3A/ ±(0.05%+0.05%FS)/ 0.1mA
0-15A/30A/ ±(0.05%+0.05%FS)/ 1mA
- CR mode: 0.1Ω-5Ω/ ±(0.2%+0.2%FS)/ 0.001Ω
0.5Ω-50Ω/ ±(0.1%+0.1%FS)/ 0.01Ω
5Ω-500Ω/ ±(0.1%+0.1%FS)/ 0.1Ω
500Ω-5KΩ/ ±(1%+1%FS)/ 1Ω
- CP mode: 0-50W/ ±(0.1%+0.1%FS)/ mW
0-150W/ ±(0.1%+0.1%FS)/ 10mW
0-300W/ ±(0.1%+0.1%FS)/ 0.1W
- Transient test mode: Min plus width: 0.1ms
Max plus width: 999s
Rising/Falling edge resolution: 0.1ms
Max Rising/Falling edge time: 6s
- List test mode: Rated Voltage, Rated Current, Rated Power, Rated Resistance, SHORT, OPEN
Specification in power meter
Wiring: Phase
Test mode: Trms
Voltage input mode: AC
Power factor range: 0.001-1.000 Formula: W÷[ (V)× (A)]= (PF)
Frequency range: 45-65Hz
Test accuracy: ±0.4% reading+0.1 % range
Test speed: 5 times/s
Input impedance: ≥1MΩ (All voltage bins)
Whole set parameter
Interface: RS-232C,USB Device
Input voltage range: 110V/220V AC, 50/60 Hz
Dimension and weight: 21mm*88mm*335mm; 6kg
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ