Anton Paar Xsample 530 ຕົວປ່ຽນຕົວຢ່າງ (71 samples)
Viscosity range
Operation with internal air pump
Operation with 2 bar external compressed air:
12.000 mPa·s at ambient and measuring temperature
36.000 mPa·s at ambient and measuring temperature
Filling mode:
Pressure mode
with integrated piston pump
with air pump of master instrument
with compressed air
Suction mode (optional)
Minimum sample volume per measurement: approx. 3 mL (with master instrument DMA™ M)
depending on system configuration
Sample recovery: optional
Rinse consumption per cycle: approx. 4 mL
Sample throughput: max. 9 per hour
depending on application and used pressure source
Number of sample vials: 71 positions for 12 ml vials
optional: 35 positions for 40 mL or 35 positions for 20 mL vials
customer specific magazines on request
Automatic filling and drying: Piston pump, internal air pump of master instrument or compressed air selectable
Compressed air supply
(optional): 1.80 bar – 2.20 bar (26 psi – 32 psi) relative external compressed air
typically: 2.0 bar (29 psi) rel.
Necessary quality of air: Class 3 from ISO 8573-1
max. particle size: 5 μm
max. pressure dew point:-20°C (-4°F)
max. oil content: 1 mg/m3
Environmental conditions (EN 61010): Indoor use only
Air humidity: 10 to 90% relative humidity, non-condensing
Operating temperature: +15 to +35 °C (+59 to +95 °F)
Power supply: supplied by master instrument
Mains voltage according to the type plate at the rear of master instrument (protective grounding required)
Dimensions excl. master instrument (L x W x H): 370 mm x 490 mm x 430 mm (14.6 in x 19.3 in x 17 in)
Weight excl. master instrument: approx. 48 kg (105.8 lbs)
Optional bar code reader: Laser Line Scanner, 1D Code Reader class 2
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ