Anton Paar Xsample 320 ຕົວປ່ຽນຕົວຢ່າງ (2 ~ 5 minutes; 10 mL ~ 20 mL)
Viscosity range: up to 3,000 mPa•s at ambient and measuring temperature¹
Filling mode: with peristaltic pump:
Suction mode in one direction
Suction mode with pumping back and forth at the beginning
Typical time for filling and measuring cycle: 2 to 5 minutes
Minimum sample volume: approx. 10 mL to 20 mL
Environmental conditions (EN 61010): indoor use only
Operating temperature: +15 °C to +35 °C (+59 °F to +95 °F)
Pollution degree: 2
Over voltage category: II
Altitude: max. 3,000 m (9,840 ft)
Power supply: supplied by the master instrument
AC power supply voltage according to technical data plate at the rear of the master instrument (protective grounding required)
Dimensions excl. master instrument (L x W x H): 205 mm x 148 mm x 205 mm (8.1 in x 5.8 in x 8.1 in)
Weight excl. master instrument: approx. 3.5 kg (7.7 lbs)
¹ Recommended for samples with a viscosity up to 500 mPa•s at ambient and measuring temperature. For samples with a viscosity higher than 500 mPa•s at ambient and measuring temperature, bubbles may occur during filling.
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ