AMETEK CTS AutoWave-WR ເຄື່ອງສ້າງສັນຍານທີ່ມີຕົວກຳນົດຊ້ຳຂອງພາລາມິເຕີ (4CH; 2CH; 500 kS/s)
Output channels: 4
Input channels (recorder): 2
Output voltage: 10 V, unipolar or bipolar
Accuracy output voltage: DC: ± 0.5 % (+5 mV) / AC: ± 1%
Input voltage (recorder): 5 / 10 / 20 / 50 / 100 V unipolar or bipolar
Resolution: 16 bit
Bandwidth / Frequency: DC ... 50 kHz / max. 500 kS/s for 1 channel
Memory: Min 60 GB hard disk, file size max. 1GB
Segment types / wave forms: dc, sine, sine sweep, square, triangular, sawtooth, ramps, exponential, formula, etc.
Number of segments: max. 50 per waveform *
Segment duration: approx. 24 h per segment
Parameter iteration: YES
Point files: YES
Interfaces
Trigger: 2x input, 2x output
DUT monitor: 2x input, configurable
Remote interface: 1x GPIB, 1x ethernet, 1x framebus (EM Test internal bus)
Other interfaces: USB A, only for data transfer by memory stick
Display:LCD, 2 lines, 40 characters
Safety: Outputs short circuit proteded (10 mA max.)
General
Dimension: 380 x 390 x 100 mm
Weight: 6.5 kg
Power main supply widerange :90 ... 250 VAC; 47 ... 63 Hz
DC Supply (WR model only): 12 ... 32 VDC / 3.15 AT
Fusage / Power: 1 AT / max. 40W
Temperature: + 5 ... + 40 °C
Humidity: 10 ... 90 %, non condensing
Athmospheric pressure: 860 ... 1060 mbar
* The effective number depends on the complexity of the waveform / segment
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ