Ainuo ANEVT800-500DA(F) ເຄື່ອງຈັດຫລັກກຳລັງ DC ທີ່ມີສອງຊ່ອງທາງທີ່ສາມາດເຮັດວຽກທັງສອງທາງ (500A, 160KW, 24V-800V)

Single channel rated current: 500A

Single channel rated power: 160kW

Single channel peak current: 625A

Single channel peak power: 200kW

Single channel voltage range: 24V-800V

Dimension mm (WxDxH): 2000x1000x2100

Input Parameter

Input method: Three-phase four-wire + PE

Input voltage: Line voltage 380V±15%

Input frequency: 50/60Hz ±5Hz

Input power factor: 0.99

Current harmonics: 3% (under rated conditions)

Output Parameter

Voltage accuracy: 0.05%FS

Current accuracy: 0.1%FS

Power accuracy: 0.2%FS

Power effect: 0.1%FS

Load effect: 0.1%FS

Ripple (Vpp): 0.2%FS

Transient recovery time: ≤3ms (10%–90% rated resistive load switching)

Current rise time: ≤3ms (load rising after starting output)

Feedback Parameter

Feedback voltage: 323–437V

Feedback frequency: Grid frequency (45Hz–65Hz)

Power factor: ≥0.99

Total harmonic content: ≤3% (tested under conditions of standard AC power input with distortion within 1.5%)

Forward and reverse output switching: ≤4ms

Feedback function: Full power continuous energy feedback

Product Features

Working mode: CV, CC, CP and CR

Output programming: It provides programmable output voltage waveforms, including voltage and current slopes, steps, cycle control, and jump control. 900-step programming function, with the minimum programmming time of 1ms.

Emergency stop: With emergency stop button, quickly disconnects connection with load equipment.

Battery simulation: 

lt can simulate models of 7 types of batteries including ternary lithium, lithium manganese oxide, lithium titanium oxide, lithium cobalt oxide, lithium iron phosphate, lead-acid, and nickel-metal hydride batteries.

lt has customizable battery cell capacity, series and parallel connection quantities, SOC, and temperature parameters with 1st, 2nd, and 3rd order battery simulation functions, supporting import and export of data in mat and CSV data formats.

Output ramp-up function: Programmable output voltage ramp-up.

Self-discharge function: It has a built-in discharge unit, which automatically discharges upon shutdown.

Protection function: It has multiple protection devices, input protection devices, OCP, OVP, OPP. OTP, bus overvoltage protection, output short circuit protection, etc.

Voltage drop compensation: It features automatic voltage drop compensation terminals, automatically compensating for cable voltage drop.

Display and Operation

Display voltage resolution: 0.001V

Display current resolution: 0.001A

Display power resolution: 0.001kW

Display mode: LCD

Operation mode: Number key, knob, and touch screen three-in-one

Communication Interface

Serial communication: Standard RS232/RS485 (select one)

CAN interface: Supports CAN2.0 protocol (AORB). Communication data update frequency ≥50Hz

Ethernet: Supports Ethernet communication (standard)

Analog Interface: Supports external analog emergency stop switch quantity input control

Safety Performance

Insulation Resistance: ≥2MΩ (tested at 1000V insulation voltage)

Compressive strength: 2000VDC 5mA/min

Grounding resistance: ≤100mΩ

Working temperature: 0–40℃

Working humidity: 20–90%RH (no condensation)

Altitude: ≤2000m

Storage temperature: -10–70℃

Noise: ≤75dB

Cooling method: Temperature-controlled air cooling. lt has a built-in temperature-controlled variable speed fan.

Protection level: IP21

*Images for illustration purposes only.