AE-MIC AE-1644E ຕົວກວດສອບຄວາມຕ້ານທານສູງສຸດ (5.00kΩ~1500.0GΩ)
Range: Measuring range:
100kΩ: 5.00kΩ~150.00kΩ
1MΩ: 50.0kΩ~1500.0kΩ
10MΩ: 0.500MΩ~15.000MΩ
100MΩ: 5.00MΩ~150.00MΩ
1GΩ: 50.0MΩ~1500.0MΩ
10GΩ: 0.500GΩ~15.000GΩ
100GΩ: 5.00GΩ~150.00GΩ
1TΩ: 50.0GΩ~1500.0GΩ
Measuring Indication Range:
Indication Range Diviation value measurement ±50.00%
Absolute value measurement 500 to 15000
Measuring Method: 2 terminal measurement with Contact check
Measuring time:
Free running: about 20 times/sec to about 3 times/sec.
External start: FAST 2.5nsec + Delay + Integration time (1msec. to 29mse.)
SLOW: 2.5nsec + Delay + Integration time (1 to 9 cycle)
Trimming mode: about 14.4msec + Integration time + (150msec only when the judgement is HI)
Comparator setting range:
Diviation value measurement: High limit/Low limit 0 to ±50%
Absolute value measurement: High limit/Low limit 0 to 15000
Measurement delay time: 0msec to 99msec Setting is possible per range
Contact check time:
Before measurement: Measuring time + 11msec
After measurement: Measuring time + 6msec
Judgement indication: HI, GO, LO, LCD display, buzzer and external signal output
Control Signal:
Start signal：start by “L”[0V or short]→ “H”[DC12V or open ]
Hold signal：Open & “H”[DC12V or open]：Free run, “L”[0V or short]：Hold
Judgement signal [LO/GO/HI]： open collector output
Contact error signal[CE]： open collector output ON
Termination signal [EOC]： open collector output ON
Operation enviroment Temperature：+5℃ to +40℃, Humidity：below 85%
Power Supply: AC85V to 265V, 50 to 60Hz, about20VA
Outer Dimension: 333(W)×99(H)×300(D)mm (excluding protruding parts such as rubber legs, etc)
Weight: about 2.5kg
Option:
- GP-IB
- Printer Cable
- Short termination (Zero ohm standard resistor)
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ