AE-MIC AE-1154D ເຄື່ອງວັດແທກການຕັດ Ohm ຕໍ່າ (0mΩ~1.5kΩ, 1mA~1A, <9V)
Range: Measuring range/ Resolution/ Current
1mΩ: 0.0000mΩ~1.5000mΩ/ 0.1μΩ/1A
10mΩ: 0.000mΩ~15.000mΩ/ 1μΩ/1A
100mΩ: 0.00mΩ~150.00mΩ/ 10μΩ/ 300mA
1Ω: 0.0000Ω~1.5000Ω/ 100μΩ/100A
10Ω: 0.000Ω~15.000Ω/ 1mΩ/ 100A
100Ω: 0.00Ω~150.00Ω/ 10mΩ/ 10mA
1kΩ: 0.0000kΩ~1.5000kΩ/ 100mΩ/ 1mA
%: 0.1mΩ～1.0000kΩ/±50.00%/ 0.01%[10nΩ]/ Mentioned above
Voltage at terminals open: Below 9V
Measuring method: 4-terminal measurement [contact check is available]
Measuring time:
【Free running mode】2～10times/sec.
【Remote start mode】about 9msec～400msec.
【Trimming mode】1msec.～100msec.
Comparator setting range:
mΩ test mode: 0~15000 [both for low and high limit]
% test mode: -99.99～+50.00% [both for low and high limit]
Indication of comparator determination result: LO/GO/HI, LED display and buzzer.
Control signal:
Input: Remote start,
Remote trimming start,
Output: Trimming speed mode
Trimming-NG
Trimming-End
Contact-Error
End of comparison
Operation condition: 【Temp.】5℃~+40℃, 【Humidity】below 85%
Power supply: AC85V~265V,50~60Hz, about 60VA
Outer dimension: 333(W)×99(H)×300(D)mm (excluding protruding parts such as rubber legs, etc.)
Weight: About 3kg
Option:
- RS-232C/ GP-IB (Only one kind of interface can be provided with the checker.)
- Short termination(Zero ohm standard resistor)
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ