AE-MIC AE-1152F 5A DC ຕ່ໍາ Ohm Meter (0mΩ~1.5kΩ, 1mA~5A, <4V)
Range: Measuring range/ Resolution/ Current
1mΩ: 0.0000mΩ~1.5000mΩ/ 0.1μΩ/ 5A
10mΩ: 0.000mΩ~15.000mΩ/ 1μΩ/ 1A
100mΩ: 0.00mΩ~150.00mΩ/ 10μΩ/ 1A
1Ω: 0.0000Ω~1.5000Ω/ 100μΩ/ 100mA
10Ω: 0.000Ω~15.000Ω/ 1mΩ/100mA
100Ω: 0.00Ω~150.00Ω/ 10mΩ/ 10mA
1kΩ: 0.0000kΩ~1.5000kΩ/ 100mΩ/ 1mA
%: 0.01mΩ~1kΩ/±50.00%/ 0.01%[1nΩ]/ Refer to above
Voltage at terminals open: Below 4V
Measuring method: 4-terminal measurement [contact check is available]
Sampling time: 【Free running 】2～10times/sec.
【External start】about 9msec～400msec.
Comparator setting range:
Absolute value measurement :0～15000[both for low and high limit]
% measurement: low limit -50〜0%,high limit: 0～+50%
Indication of comparator determination result: LO/GO/HI, LED display and buzzer.
Control signal:
Start signal：start by ”L”[0V]→”H”[DC12V]
Hold signal：Open and”H” [DC12V]：Free run,”L”[0V]：Hold
Determination result signal [LO/GO/HI]： open collector output max40V, 100mA
Contact check error [CONT-E]： open collector output max40V, 100mA
Termination signal [EOC]： open collector output max40V, 100mA
Operation condition: 【Temp.】5℃~+40℃, 【Humidity】below 85%
Power supply: AC85V~265V,50~60Hz, about 60VA
Outer dimension: 333(W)×99(H)×300(D)mm (excluding protruding parts such as rubber legs, etc.)
Weight: About 3kg
Option:
- RS-232C I/F; GP-IB I/F; LAN I/F; Bar code/ two-dimensional code reader ＋RS—232C I/F (Only one kind of interface can be provided with the checker)
- Printer output (Centronics）I/F
- Each cable（RS-232C,GP—IB,printer）
- Short termination(Zero ohm standard resistor)
ຮັບສ່ວນຫຼຸດພິເສດຕາມປະລິມານ, ອັບເດດລາຄາຂາຍສົ່ງ ແລະ ການແຈ້ງເຕືອນສິນຄ້າໃໝ່ສົ່ງກົງເຖິງອິນບັອກຂອງທ່ານ.
ໂດຍການສະໝັກສະມາຊິກ, ທ່ານຍອມຮັບ ເງື່ອນໄຂການໃຫ້ບໍລິການ ແລະ ນະໂຍບາຍຄວາມເປັນສ່ວນຕົວ ຂອງພວກເຮົາ.
ເຂົ້າເຖິງຜູ້ຊ່ຽວຊານທີ່ໄດ້ຮັບການຢັ້ງຢືນຂອງພວກເຮົາໂດຍກົງ