Ureach IT300G SATA HDD/SSD Duplicator ແລະ Sanitizer (9 GB/min, 1~3)

Targets: 1-3

Speed: 9GB/min. (150MB/sec.) *Actual performance is dependent on HDD transfer rates.

Buffers: Up to 512MB

Supported Formats 

All Partitions/Whole HDD/Percentage:  copies all types of formats, both known and unknown.

Quick Copy:copies FAT16/32/64, Windows (NTFS), Mac (HFS/HFS+/HFSX), and Linux (Ext2/3/4).

Operating Type: Stand-alone, non PC-based operation

Language Support: English, Japanese

LCD Display: Backlit Monochrome LCD Display

LEDs: 3 LED Indicators per Port:  Yellow (Power), Green (Pass), Red (Fail)

Control Panel: 4 Push Buttons (▲, ▼, OK, ESC)

Copy Modes: Quick Copy, All Partitions Copy, Whole HDD Copy, and Percentage Copy

Skip Bad-Sectors: Manually set (Bad sector) threshold range to skip during copy process

Compare Function: Bit-for-bit data comparison

Sanitization Modes: Quick Erase, Full Erase, DoD Erase, and Secure Erase

PC Monitoring: Real-time status monitoring through PC

Log Report Management

Monitor real-time recordings and Log Reports via PC-Link

Event log reports are generated through the USB port and saved to USB devices

OS Supported: All (Windows, Linux, and other stand-alone systems)

Compatible Interfaces

w/o Adapters: 1.8"/2.5"/3.5” SATA HDDs and SSDs

w/ Adapters: IDE, microSATA, mSATA and M.2

Advanced Formats: Supports MBR, GPT, and Advanced formats.

Power Supply: Selectable Voltage 115V or 230V, 50/60Hz

Temperature Range

Operating Temperatures: 5°C ~ 45°C (41°F ~ 113°F)

Storage Temperatures: -20°C ~ 85°C (-4°F ~ 185°F)

Humidity Range

Working Humidity: 20% ~ 80%

Storage Humidity: 5% ~ 95%