Lonroy TY7003 微型注塑机 (105N.M)

Loading torque: 105N.m (servo motor + planetary reducer)

Atmospheric pressure: ≥0.8mpa

Injection range: 0-80mm

Injection resolution: 0.1mm

Hopper capacity: 0.2l

Feeding speed: 0.1-60rpm (highest 100rpm, after 60rpm, the torque decreases to 50%)

Opening stroke: 70mm (does not contain the mould)

Injection force: 1.8t (can be increased by a force multiplier System 3.6t)

Maximum emission: 57mpa(backup system upgraded to 113mpa)

Maximum injection rate: 25cm 3(less fluidity of the need to customize the force multiplier system) 

Clamping force: 2t(hyperbolic arm clamping device) 

Maximum temperature: one/two/three district 360°c

Temperature accuracy: ±0.5°c(temperature constant state)

Power/full load power: individual event ac 220v±10%; 50hz;2200w; 10a

Screw diameter: 20mm

Setting ring outside diameter: 50mm

Columbine spacing: 280*186mm center distance

Mouth size: 360*90*72mm (lxwxt) without die

Mould thickness: 0-25mm

Boundary dimension: 1700×500×950mm

Package size: 1800*700*1100mm

Application materials: engineering plastic pp, pe, pa, abs, tpu, Pla, etc

Gross net: weight of machine 420/380kg